Actions
In the Memory Page Manager, you can perform the following actions:
Action | Description | ||
Download | Loads the working dataset, reference dataset and/or code page to the control device memory. The data can also be loaded from a HEX file. This is a default action if the checksums of the INCA datasets differ from the checksums of the ECU datasets. | ||
Upload | Reads the working dataset, reference dataset and/or code page from the control device memory. | ||
Equalize | Loads all valid calibrations from the dataset to the control device memory, then loads the calibrations that are unknown in the dataset from the control device memory to the dataset.
| ||
Copy | Copies the working dataset to the reference dataset or vice versa. | ||
Flash programming | Programs the flash EPROM in the ETK or the control device with the contents of the working or reference dataset and the code page. This action uses the integrated program ProF. | ||
Verify checksum | Calculates the checksums for the working dataset, reference dataset and/or code page. | ||
Hex.view | Opens the HEX Editor window, in which you can view, edit and compare the working dataset, the reference dataset or the code page. | ||
Reset | Addresses the reset of the control device. This action is not supported by most control devices. |
You can
Copying a Working Dataset to a Reference Dataset
Copying a Reference Dataset to a Working Dataset
Merging Contents of Dataset and ECU Memory