Recorders Pane

The following elements can be displayed in the Recorders pane:

Enabled

This column indicates whether or not the recorder is activated.

When the recorder is activated, the symbol is displayed. If not, the symbol is displayed. If the symbol is displayed, the recorder is configured incompletely or incorrectly.

Name

This column displays the name of the recorder. The default recorder is also marked by a * symbol and cannot be deleted.

Status

The status is indicated in this field. The following statuses are possible:

Inactive
Waiting for trigger
Record
Wait for comment

Reliable Trigger

This column displays the delay if the data volume is too large to be permanently buffered (Define Automatic Start Trigger, Define Automatic Stop Trigger).

Recordings

This column displays the number of records. The sum total comprises the initial record and the number of repeats set in the recorder configuration.

Note
This option is available only for trigger-controlled records.

Trigger PreStart

This column displays the prestart time set in the recorder configuration.

Note
This option is available only for trigger-controlled records.

Duration

This column indicates how long each recorder has been recording.

Remaining Time

This column indicates how long a started recorder still has to run.

Note
Requirement: a fixed recording time has been set in the recorder configuration.

Post Stop

This column displays the run-on time set in the trigger definition.

Note
This option is available only for trigger-controlled records.

Timestamp Errors

This column displays the number of errors determined by the plausibility check (Settings for checking the plausibility of timestamps).