Defining an Automatic Stop Trigger

To configure an automatic stop trigger for the end of measure data recording:

  1. In the context menu, select the Open Recorder Configuration (Ins) command or double-click on the desired recorder.

    The dialog box Recorder Configuration opens.

  2. Select the Triggers tab.

  3. In the Stop trigger field, select the trigger condition to be used.
    To create a new trigger condition or edit an existing one:

    1. Click on the   icon.
    2. The Trigger Editor dialog box for editing and maintaining the trigger conditions opens.
  4. Select the trigger condition to be edited or create a new trigger condition.
  5. Edit the condition for the stop trigger:

  6. Click OK.

    The automatic stop trigger is configured.

Note

A stop trigger can be used only together with a manual or automatic start trigger.

In case a stop trigger is defined, the recording can be extended after the stop trigger event by means of entering a post stop trigger time.

See also

Defining the Output File

Using Measurement Reduction

Defining a Manual Start Trigger

Defining an Automatic Start Trigger

Overview Trigger Editor

Creating Trigger Conditions

Recorder Configuration - Recording

Recorder Configuration - Triggers

Recorder Configuration - MDA

Recorder Configuration

See video

The use of triggers is also demonstrated in the following video, which you can open from the Video Tutorials:
INCA Recorder Manager: Setting Triggers in the INCA Recorder Configuration Dialog