User Options: Data Exchange Tab

To go to this tab, click the User Options button and select the Data Exchange tab.

For further information about data exchange, see Settings for Data Exchange: Detailed Information and Settings for Data Exchange: Supported Function.

You can perform the following settings:

• Write defined only

  Determines whether calibration variables containing fill bytes will also be written to data exchange files.

  In the hex files, fill bytes can be used to fill up address ranges that are not contained in the original hex file. Whether fill bytes will be used in the hex files can be set in the INCA user options for Hex files with the option Bytes to write in HEX file.

  yes	Only variables without fill bytes are written to data exchange files.
  no	All variables, including those with fill bytes, are written to data exchange files.

• Boolean format

  Defines the format of Boolean (binary) values.

  true/false	The values are displayed as true or false.
  Integer	The values are displayed as the integers 0 or 1.

  Note
  When Boolean values are copied to the clipboard, they are copied with the notation that is selected in this user option.

• Float infinity format

  Defines the format for representing the float infinity values.

  + - Inf	The values are displayed as +-Infinity float value.
  Double maximum	The values are displayed as +- double/float maximum value.

• Exponential

  Defines the maximum number of places shown as decimal places. If this number is exceeded, the numbers are shown in exponential form.

• Clip and truncate values

  Defines whether values are clipped or truncated for actions in the application manager and read actions in the experiment environment. The precision of this clipping/truncating is defined in the ASAM-2MC COMPU_METHOD.

  Settings for Data Exchange - Clip and Truncate

• Maximum precision

  Defines the exact number of digits used for writing or reading data.

  from ASAM-2MC file	Precision as defined in the ASAM-2MC file
  by data type	Precision as defined by the respective data type
  calculate automatically	Precision as defined by the minimal difference of adjacent values
  Maximum precision	Precision as defined by definition of number format float64
  calculate minimum difference/calculate automatically	Precision as defined by the minimal difference of adjacent axis points and the minimal difference of adjacent values

  Settings for Data Exchange - Maximum Precision

  Note
  When values of calibration variables are copied to the clipboard, they are copied with the precision that is selected in this user option.

• Default path

  Specifies the default path for reading and writing data exchange files.

• Quality meta data

  Note
  The setting is available only if the INCA-QM-BASIC add-on is installed together with INCA.

  Opens the Quality Meta Data dialog box, in which you can set preferences for the handling of quality meta data information.

• PaCo

  Opens the PaCo dialog box in which you can make settings for the PaCo data exchange format, see User Options for Data Exchange: PaCo Dialog Box.

• CDF V2.x

  Opens the CDF V2.x dialog box in which you can make settings for the CDF V2.x data exchange format, see User Options for Data Exchange: CDF V2.0 Dialog Box.

• DCM

  Opens the DCM dialog box in which you can make settings for the DCM data exchange format, see User Options for Data Exchange: DCM Dialog Box.

• CVX

  Opens the CVX dialog box in which you can make settings for the CVX data exchange format, User Options for Data Exchange: CVX Dialog Box.

• Bounds check

  Opens the Bounds Check dialog box in which you can define which bounds that are defined in the ECU project description file (*.a2l) shall be checked, see User Options for Data Exchange: Bounds Check Dialog Box.

• LAB

  Opens the LAB dialog box in which you can make settings for the LAB file, see User Options for Data Exchange: LAB dialog box.

See also

Settings for Data Exchange: Detailed Information

Settings for Data Exchange: Supported Function

User Options for Data Exchange: PaCo Dialog Box

User Options for Data Exchange: CDF V2.0 Dialog Box

User Options for Data Exchange: DCM Dialog Box

User Options for Data Exchange: CVX Dialog Box

User Options for Data Exchange: Bounds Check Dialog Box

User Options for Data Exchange: LAB

User Options Dialog Box