Switch between ECU Working and Reference Page

You can switch between the working page and the reference page of the ECU/(X)ETK. The corresponding toggle menu item has two states:

Switch to ECU working page
Switch to ECU reference page

ECU page switching is not supported for all (X)ETK device types.

After switching, the ECU reads its calibration data from the other page. To switch from the ECU working page to the ECU reference page:

Check the value of the ECU Page field in the Hardware Status List.
In the Hardware menu, click on Switch to ECU reference page.
You can see the change of the current state in the ECU Page field of the Hardware Status List.

To switch from the ECU reference page to the ECU working page:

Check the value of the ECU Page field in the Hardware Status List.
In the Hardware menu, click on Switch to ECU working page.
You can see the change of the current state in the ECU Page field of the Hardware Status List.

Never switch between ECU working and reference page in a moving vehicle on the road, if you are not sure that the destination page contains correct data! Switching to a page containing unknown or invalid data can lead to unexpected behavior. Before switching between ECU working and reference page, make sure that the destination page contains correct data.