Sources Pane

Calling the source pane from the Experiment Environment

In the Experiment Environment, all devices added to the experiment in the Hardware Configuration Editor are listed in this pane. Depending on the corresponding device functions, groups, and rasters are shown additionally if necessary.

Calling the source pane from the Calibration Data Manager (CDM)

In the CDM environment, the functions of all devices added to the experiment in the Hardware Configuration Editor are listed in this pane.

Functions, groups, and rasters will be displayed if you click on the plus symbol in front of the device.

Likewise additional LAB-Files and filter configurations will be displayed.

Open Raster Preselection

Opens the Raster Preselectiondialog box. Use this dialog box to define a uniform raster for all variables of a device. This also applies to variables not displayed in the data list due to a set filter.

Note
The A2L file indicates whether you can make a raster preselection or not. If you cannot make a raster preselection, the command Open raster preselection and the option Predefined raster will not be present in the Sources pane.

Use Predefined Raster

Predefined raster are rasters which an A2L project optionally defines for a variable. If Use Predefined Rasters is enabled, INCA uses the predefined rasters from the A2L file.