Importing Measurement Data

To import measurement data, proceed as follows.

1. In the ASCMO-STATIC start window click New in the menu panel on the left

2. Click .

   The "ASCMO Data Import" window and a file selection window open.

3. In the file selection window, enter or select path and name of the file you want to import.

   You can import Excel (*.xls, *.xlsx) files and lists of comma-separated values (*.csv, *.txt).

4. Click Open.

   If the file contains several work sheets, the "Select Sheet" window opens.

5. In that window, select the desired work sheet and click OK.

   The content of the file is loaded into the "ASCMO Data Import" window. The data as well as inputs and outputs are displayed.

6. In the "ASCMO Data Import" window, assign the available data to inputs and outputs.

7. Select types for the inputs.

8. If desired, do one or both of the following optional steps:

   • Display and check the data.

   • Check the relevance of the inputs.

9. Click OK to import the data into ASCMO-STATIC.

   An ASCMO-STATIC project is created with this data, and the measured data is shown in the ISPintersection plot view.

See also

Assigning Inputs and Outputs (ASCMO-STATIC)

Displaying the Measurement Data

Checking the Relevance of the Inputs (ASCMO-STATIC)