Vector VN1610
The Vector VN1610 supports the application via the CAN interface of an ECU as well as captures and records communication data on the network for CAN. The VN1610 is connected to the computer via USB.
Note |
The operation of the VN1610 requires a computer driver which is provided with the hardware by the hardware manufacturer. The operation of the VN1610 with ETAS software must be enabled by ETAS. Please contact your local sales representative to get the enabling key. |
System limits
The VN1610 module provides 2 CAN interfaces.
INCA supports up to four VN1610 modules simultaneously.
Module parameters
Parameters tabNameEnter any name for the hardware module.
Serial numberShows the serial number read from the device.
If the hardware is not connected or if it was not found during the hardware search, enter the complete number by hand (it can be found on the device).
The serial number must be entered as it is needed by INCA to identify the device. The serial number is stored in the hardware configuration.
Firmware VersionShows the firmware version of the connected hardware module.
Application options
Via the CAN interface:
Model Based Calibration Using XCPSimTime
Diagnostics Using OBDonCAN (available only with ODX add-on)
Working in the Hardware Configuration Editor