Network Interface Card
INCA supports local network cards for Ethernet and Some/IP Monitoring interfaces.
System Limits
To receive Jumbo frames or VLAN tagged frames, you need additional network card specific settings.
You can add the AUTOSAR files for a network interface card in the Hardware Configuration Editor.
Module parameters
Parameters tabNameEnter any name for the system.
Serial NumberTo uniquely identify the network card, INCA uses the MAC address and displays it as serial number. Network cards with no unique MAC address will be ignored, for example, virtual network loop back adapters. Network cards with DHCP IP address will also be ignored.
Alias nameNetwork connection name of the selected network card.
Firmware VersionShows the firmware version of the connected hardware module.
INCA hardware communicationShows the hardware connection between the hardware and the PC.
You cannot edit this field.
Application options
Via the Ethernet (ETH) interface:
Working in the Hardware Configuration Editor
Opening the Hardware Configuration Editor