Optimization on Driving Cycle Traces Manually

In addition to the automated global optimization, you have the possibility to optimize manually by calibrating the calibration maps. The data obtained from the optimization will be transferred to the calibration maps. Then the operating points of the new calibration maps may be changed in terms of optimization. The adjustment in the calibration maps will be displayed in the Prognosis Results window (opened via Calibration > Prognosis > Results) directly. For more information on how to calibrate calibration maps for optimization, see Calibration .

Note
The Calibration menu and the Global Optimization function in the Optimization menu are only available if operating point axes have been selected (see Assign Inputs and Outputs). You can set the operating point axes via In/Outputs > Set Operating Point Axes.