Importing ASCMO-STATIC/ASCMO-DYNAMIC Models

You can add ASCMO-STATIC or ASCMO-DYNAMIC models, which can then be used as function nodes. To import an ASCMO-STATIC/ASCMO-DYNAMIC model, proceed as follows:

In the Models Step, click on Add Model → Import ASCMO Model.

A file selection window opens.
In the file selection window, select the*.ascmo or *.ascmodyn file you want to import, then click on Open.

The "Import ASCMO models from file" window opens. The "Import Models" area lists all ASCMO outputs, the "Input Mapping" area lists all ASCMO inputs and offers all MOCA data channels and function nodes for mapping.
In the "Import Models" area, activate the option in the "Import" column for each ASCMO output you want to import as model.

In the "Input Mapping" area, do the following:

Select an ASCMO input.
In the "MOCA Name" column next to the selected input, open the combo box.

The combo box offers all MOCA data channels and function nodes for selection.
Select the channel or node you want to map to the ASCMO input.

Note
All ASCMO inputs must be mapped to MOCA elements before you can use the ASCMO model. You can map the ASCMO inputs either here in the "Import ASCMO models from file" window, or in the lower part of the Models Step.

Click on OK to perform import and mapping.

For each selected ASCMO output, a new line is added to the model list.

For each unmapped ASCMO input, the following warning appears in the log window: Warning: The following failure occured during evaluation of input "<input>". Assuming input range [-1, 1]. Unknown identifier "<input>"