Move / Copy Configuration As Dialog Box
This dialog box contains the following fields and buttons:
Destination Device Type
Lists all device types that can be used
with the current configuration (i.e. the device type of the selected configuration
as well as all compatible device types).
In the destination project, the configuration will be used with the device
type that you select in this list.
Destination Project
Lists all projects that are opened in the XETK Configuration Tool. The current configuration will be moved or copied to the project that you select in this list.
Create a copy
If you tick this checkbox, a copy of
the configuration will be appended to the destination project.
If the checkbox is not ticked, the configuration will be moved to the destination
project, i.e. it will be removed from the current project.
Include device specific hardware settings only
If you tick this checkbox, only the
settings that are directly hardware-specific will be copied or moved to
the destination project.
If the checkbox is not ticked, additional settings including raster and
memory layout settings, will also be copied or moved to the destination
project, overwriting the corresponding settings in the destination project.
OK
Moves or copies the configuration to the selected destination project.
Cancel
Closes the dialog box without copying or moving the configuration.
See also