Overview of ETAS Drive Recorder Add-On

Note
The Drive Recorder is only available if the Drive Recorder add-on was installed together with INCA.

Areas of application

The ETAS Drive Recorder modules (ES720_ES820) can be used for a variety of measurement tasks in the development, calibration, and validation of electronic vehicle systems.

The Drive Recorder modules are easy to integrate into existing vehicle instrumentation. Replacing the INCA computer or laptop, the modules capture and record signals from ECUs, buses, networks, sensors and measuring instruments in the vehicle.

Once configured, the modules record all data from connected devices without the user or driver having to do anything else.

Main functions

Using the ES89x and ES5xx interface modules, the ECUs can be connected to the Driver Recorder via ETK, XETK or FETK interfaces and multiple LIN, CAN/CAN FD and FlexRay buses.

Additionally, the measurement modules of the ES400 and ES600 product families allow to record various signals of the vehicle environment. The Drive Recorder modules and the corresponding cables are designed for use in the passenger compartment or vehicle trunk and also at the test bench and in the laboratory.

Additional information about the module can be found on the ETAS homepage: www.etas.com