Setting Measurement Signal Display in YT-Oscilloscope (outdated)

To set the measurement signals in the YT-oscilloscope (outdated):

1. In the context menu, select Properties.

   A dialog box for display properties opens.

2. Make your settings on the Type tab:

   • Line style to select the line type of the measure signal

   • Line color to select the color of the measure signal

     Note
     If you have activated the auto. Color setting, the colors will be used in the sequence that you defined on the Type tab in the Channel Color List field.

   • Line width to set the line width of the measure signal
   • Symbol to select the symbol with which the signal acquisition points are marked
   • Size symbol to define the size of the symbol with which the signal acquisition points are marked
   • Fill Style to color-highlight the areas in the bit signals.
   • Display type to select between step and line display of the signals.
   • Show the index to display the measurement signal with its channel number.

3. Click OK.

   The display of the measurement signal in the YT-oscilloscope changes accordingly.

See also

Changing Color Sequence