Reconfiguring the PoolRAM Automatically

INCA does not automatically clear used PoolRam.

To reconfigure used PoolRAM:

In the Variables menu, point to Single Pointered and then select Automatic Reconfigure.
The PoolRAM of the current hardware device is cleared.

Note
In the monitor window, you can check the number of bytes that have already been used by the PoolRAM. Below the `CALIBRATION_METHOD_AUTOSAR_SINGLE-POINTERED` this number is displayed in % and bytes. To reconfigure respectively initialize all hardware devices press F3.

Note

In the monitor window, you can check the number of bytes that have already been used by the PoolRAM. Below the CALIBRATION_METHOD_AUTOSAR_SINGLE-POINTERED this number is displayed in % and bytes.

To reconfigure respectively initialize all hardware devices press F3.