Virtual Prototyping Interface
The INCA-EIP add-on package allows you to experiment on PC-based hardware using prototypes that are generated by INTECRIO. This type of configuration allows different time scalings.
Module parameters
Parameters tabNameEnter any name for the system.
Serial numberShows the serial number read from the device.
If the hardware is not connected or if it was not found during the hardware search, enter the complete number by hand (it can be found on the device).
The serial number must be entered as it is needed by INCA to identify the device. The serial number is stored in the hardware configuration.
Firmware VersionShows the firmware version of the connected hardware module.
INCA hardware communicationShows the hardware connection between the hardware and the PC.
You cannot edit this field.
See also
Module Parameters for X86 PC Controller
Working in the Hardware Configuration Editor