Importing Signals

You can import signals from measurements and LAB files or import calculated signals. Additionally, you can configure the imported signals.

Note that the maximum length of a signal label is 63 characters. If you import a signal with a label exceeding this limit, the additional characters are cut off during the import. If you have two identical signal labels exceeding the limit, the system automatically adds a suffix (e.g. _1, _2) to differentiate them.

Note that only the labels / names of the signals are imported and not the complete values of the signal.

To import signal labels

1. Click Signals.

2. Do one of the following:

   • Click Load from measurement. Then, select a file and click Pick.
   • Click Load from Lab file. Select one or more LAB files. Note that the imported LAB file must comply with the standard structure. Otherwise, the file cannot be imported.
   • Click Load config_signals.csv. Then, select a file and click Pick.

3. Additionally, you can define aliases or calculated signals. For more information, see Maintaining Signals.