Prognosis With Cycle-Based OP-Weighting

With the cycle-based weighting of the operating points, you can already perform the prognosis without editing the calculation rules.

Note
The Calibration menu is only available, if operating point axes have been selected during data import (see Assign Inputs and Outputs). You can set the operating point axes afterwards in the menu In/Outputs > Set Operating Point Axes.

Perform prognosis without editing calculation rules

• Select Calibration > Prognosis > Results.

• The Prognosis Results window opens. The iterative process of optimization can now be performed.

For more information on how to perform the optimization, see Optimization .