Calculation Rules for Cycle Forecast

To obtain a cycle value from the stationary measure values, you may well have to make some conversions (e.g. time-based measuring ® route-based prognosis).

Note
The Calibration menu is only available, if operating point axes have been selected during data import (see Assign Inputs and Outputs). You can set the operating point axes afterwards in the menu In/Outputs > Set Operating Point Axes.

Defining the conversion of units

• Select Calibration > Prognosis > Calculation Rules.

• The Calculation Rules for Prognosis window opens.

  

  The meanings of the fields are described in the ASCMO-STATIC online help (<F1>).