INTECRIO Experiment

Note
Since V6.4.6, ASCET‑RP supports only the ES900 hardware system. Projects with an ES1000 hardware configuration cannot be used. To work with RTPRO-PC hardware configurations, you have to use an external INTECRIO V4.7.2 or older as hardware configurator (see Selecting an External Hardware Configurator).

Note

Since V6.4.6, ASCET‑RP supports only the ES900 hardware system.

Projects with an ES1000 hardware configuration cannot be used.

To work with RTPRO-PC hardware configurations, you have to use an external INTECRIO V4.7.2 or older as hardware configurator (see Selecting an External Hardware Configurator).

If you have installed both ASCET and INTECRIO, you can experiment with your Rapid-Prototyping project in INTECRIO. The project editor offers a function for this purpose which allows convenient transfer of the experiment.

Experiments that use an ES910 or RTPRO-PC target contain two memory pages. To make use of both memory pages, you have to use INCA/INCA-EIP as experiment environment; the ASCET or INTECRIO experiment environment does not support multiple memory pages. See the INCA and INCA-EIP documentation for details on using memory pages.

This online help contains general instructions for experimenting with INTECRIO. A specific sample task can be found in the ASCET Getting Started manual, chapter "Tutorial".