Hardware Systems

Note
Since V6.4.6, ASCET‑RP supports only the ES900 hardware system. Projects with an ES1000 hardware configuration cannot be used. To work with RTPRO-PC hardware configurations, you have to use an external INTECRIO V4.7.2 or older as hardware configurator (see Selecting an External Hardware Configurator).

Note

Since V6.4.6, ASCET‑RP supports only the ES900 hardware system.

Projects with an ES1000 hardware configuration cannot be used.

To work with RTPRO-PC hardware configurations, you have to use an external INTECRIO V4.7.2 or older as hardware configurator (see Selecting an External Hardware Configurator).

Transferring an ASCET project to INTECRIO requires an ETAS experimental system, i.e. one of the following targets must be selected in the project properties:

ES900 system (with ES910.2 or ES910.3)
Prototyping
When the Prototyping target is selected, the hardware is determined in INTECRIO.

Previous ASCET versions also supported the ES1130, ES1135, and RTPRO-PC targets. The ES113x targets are no longer available. The outdated RTPRO-PC target can still be selected in the Project Properties window, however, to use this target with ASCETV6.4.10, you need a working installation of INTECRIO V4.7.2 or lower as hardware configurator.