Editing All Sample Points Simultaneously

Note
Sample points or axis points of arrays, matrices, fixed or group characteristic lines and maps, or distributions, cannot be edited. For arrays, matrices, and fixed characteristic lines/maps, the Axis menu is deactivated.

Normal Characteristic Lines/Maps

In the Axis menu, select X Supporting Points Setup.
The X Supporting Points Setup dialog window opens.
For characteristic maps, the menu option Y Supporting Points Setup is available to edit the y axis.
Enter an offset and a distance into the relevant fields.
Click OK to confirm your changes.
The x axis points of the entire table are set up as specified. The first point gets the value specified as the offset, all other values are incremented by what is specified as the distance.

Distributions

The values of a distribution are used as sample points of group tables. To edit all distribution values (and thus the sample points of the associated group tables) simultaneously, proceed as follows:

In the Axis menu, select Edit Distribution Points.
The Distributions Setup dialog window opens.
Enter an offset and a distance into the relevant fields.
Click OK to confirm your changes.
The values of the distribution are set up as specified. The first value gets the specified offset, all other values are incremented by the specified distance.