Display Setup Window

This window is used to set up oscilloscope, recorder, and 1D graphical editor. It contains the following elements:

• Value axis field

  Sets the minimum (from field) and maximum (to field) of the display for the selected channel or line.

• Display type combo box

  Note
  Only for oscilloscope and recorder.

  Sets line style for oscilloscope and recorder. Available selections are steps (a step is drawn between each two measurement values) and line (measurement values are connected by straight lines).

• Line color selection field

  Selects the line color for the selected channel or line. The current color is shown in the box below the selection field.

• Time Axis field

  Note
  Only for oscilloscope and recorder.

  Sets the extent of the time axis. This setting applies to all channels.

• X-axis field

  Note
  Only for 1-D graphical editor.

  Sets the minimum (from field) and maximum (to field) of the X axis.

• Grid option

  Note
  Only for oscilloscope and 1-D graphical editor.

  Activates/deactivates the grid.

• INC / DEC Step field

  Note
  Only for 1-D graphical editor.

  Sets the step size for automatic incrementation/decrementation.

• Background color selection field

  Selects the background color for the display. The current color is shown in the box below the selection field.

See also

Setting up the Oscilloscope Window

Setting up the 1D Graphical Editor