Setting up the Oscilloscope Window

The Display setup window contains some options that do not affect individual channels, but are applied to the entire oscilloscope window.

1. Open the Display setup window.

2. Adjust the value in the Time Axis area.

   The value you enter here determines the time slot that is displayed by the oscilloscope. A value of 1 (0.5, 2, 5, etc.) means that the oscilloscope will show the output of one (0.5, two, five, etc.) second. The default value is 1 second.

   Note
   Keep in mind that, during offline experiments, these values do not correspond to the real time the calculations take.

3. From the Background Color field, select a background color.
4. Activate or deactivate the Grid option to display the axis grid in the display area or hide it.

5. Click OK.

   The settings become active. When you changed the time slot, the curves already displayed in the display area are deleted.