Zooming

To see how you can use the possibilities of the Scatter Plot instrument, watch our video Using the Scatter Plot.

You can perform the following actions:

• To define the zoom area
• To show the complete value range

To define the zoom area

1. Press either Ctrl and the left mouse button or just the right mouse button.

2. While keeping the button pressed, move the cursor horizontally or vertically.

3. The selected zoom area is highlighted.

To show the complete value range

If you perform the following steps, only the signal values are considered that are part of the currently visible time range in the time slider. If all samples of the signal from the whole measure file shall be considered, you must additionally adapt the time range. For more information, see  To show the full time range of the measure file.

1. If you want to show the complete value range for all strips, click .

   or

1. If you want to show the complete value range of a specific signal, right-click its axis.

2. Select Zoom to Complete Value Range.

   or

1. If you want to show the complete value range of both signals in a strip, right-click its axis.

2. Select Zoom Both Signals to Complete Value Range.