Toolbar
| Opens a dialog where you can select a GCF file for importing a configuration |
| Saves the configuration in a GCF file |
| Saves the configuration in an A2L file in order to export it to other tools |
| Resets the column width in the parameter table |
| Searches for connected hardware and opens a dialog where you can map physically connected devices on the devices in the current configuration in the Daisy Chain configuration program. |
| Assigns an IP address to a daisy chain |
| Initializes a daisy chain |
| Verifies a daisy chain |
| Opens a dialog where you can specify the module to be inserted into your configuration. |
| Removes the device currently marked in the Topology list from the current configuration. |
| Starts online measurement |
| Stops online measurement |
| Opens the Set Alias Name dialog box where you can define an internal name for the device |
| Opens the Set Device Name dialog box where you can rename a device |
| Causes the physically connected device which is represented by the device selected in the Topology list to signal its location by flashing an LED. |
| Downloads the configuration to the physically connected hardware |
| Uploads the configuration from the physically connected hardware |
| Opens the online help for the Daisy Chain configuration program |
| Resets the column width in the parameter table |
| Toggles between flat list and structured list of the modules in the Topology list |
| Opens the Set Alias Name dialog box where you can define an internal name for the device |
| Opens the Set Device Name dialog box where you can rename a device |
| Causes the physically connected device which is represented by the device selected in the Topology list to signal its location by flashing an LED. |
| Downloads the configuration to the physically connected hardware |
| Uploads the configuration from the physically connected hardware |
| Opens the help for the Daisy Chain configuration program |
See also