Calibration Using FETK

FETK are hardware devices similar to ETK which, in contrast to other ETK, must be connected to an ES89x device. The ES89x device can be directly connected to the PC via the Ethernet interface (XCP).

The individual FETK types basically differ in the sort and scope of ECU memory emulation. FETK can emulate either the ECU program and data or only data without any program element. These differences take effect in INCA in the Memory Page Manager via an available corresponding function.

FETK support high effective throughput of about 2 MBytes or more.

Regardless what FETK type you use, the parameterization described here applies equally for all FETK types.

See also

Parameters for FETK