Showing and Hiding TEDS Information

If your configuration contains a device connected to a sensor cable with TEDS chip, you can view specific information on the TEDS chip (e.g. version) in the Daisy Chain configuration program.

Note

The display of TEDS information is supported only for ES411 and ES415 devices; the TEDS tab is displayed only if an ES411 or ES415 device is selected in the Topology list.

To show or hide TEDS information:

  1. In the View menu, select Show All TEDS Information.

    The command applies to the complete configuration. It is a toggle, i.e. you can hide the TEDS information by selecting the same command once again.

    The TEDS information is displayed in a separate tab. The corresponding information is automatically set and can not be changed.