LIN Interface
Note |
The LIN interface is available only if the Add-On INCA-LIN is also installed. To configure the LIN interface, a module with a LIN interface must be added to your hardware configuration. |
Regardless of how you use the LIN interface or what hardware you use to communicate with the LIN interface, the central bus parameters must be set.
For LIN, it is necessary to read a description file. An LDF file (LIN Description File) is namely required. The LIN project file is on the LIN Monitoring level.
See also
Module Parameters for LIN Interface
Application options
Via the LIN interface:
Working in the Hardware Configuration Editor