ES920 FlexRay Module
The ES920 FlexRay Module adds a FlexRay bus interface to the ES910 / ES910.3 Rapid Prototyping Module. It is plugged into the extension slot of the ES910 / ES910.3 module.
System limits
Note |
This module is available for configuration only if the INCA-FlexRay add-on is also installed. |
- One FlexRay interface with two channels A and B for XCP on FlexRay and FlexRay monitoring
Module parameters
The ES920 itself has no properties for which parameters can be set. Therefore, if you click the corresponding entry under Hardware devices, the right side of the window remains blank.
Application options
Via the FlexRay interface:
FlexRay Monitoring (available only with INCA-FlexRay add-on)
Measurement and Calibration Using XCP (FlexRay Bus)
(available only with INCA-FlexRay add-on)Working in the Hardware Configuration Editor