Editing a x/y/z Axis Point Value Directly
Depending on the type of calibration variable you have selected, you are shown the following axes:
- x axis for characteristic curve or map
- y axis for map
- z axis for map with three input parameters
- z axis 1/2 for map with four input parameters
The process of managing axis points is the same for all axes.
To replace an axis point value with a specific value:
- Click on the axis point which you want to edit directly.
In the context menu select the submenu x/y/z axis or z axis 1/2 and then the menu function Edit x/y/z axis point.
The Edit x/y/z axis point dialog box opens.
- Enter the new axis point value.
Click OK.
The axis point value changes accordingly.
Modifying an axis point value has the following effects:
- An
arrow
next to the axis point value indicates that the axis point value on the
working page has been reduced from the axis point value on the reference
page. - An
arrow
next to the axis point value indicates that the axis point value on the
working page has been increased from the axis point value on the reference
page. - The values for the axis point change according to the defined interpolation method. An arrow next to the data indicates that the data on the working page has been changed from the data on the reference page.
See also
Incrementing an x/y/z Axis Point