Starting the Recorder and the Recording
To start a recorder and the recording from within the experiment environment, the following options are available.
To start all enabled recorders:
- In the experiment environment, click on the
icon or select the Start Visualization (F11) command in the Measurement menu.
All activated recorders are being started. If a start condition (manual or a trigger signal) is defined for the start of a recorder, it must be met.
To start a recorder with a manual trigger, press the F5 key during the recording.
To start the default recorder and all enabled recorders
- In the experiment environment, click on the
icon or select the Start Recording (F12) command in the Measurement menu.
All enabled recorders and the default recorder are being started. If a start condition (manual or a trigger signal) is defined for the start of a recorder, it must be met.
To start a recorder with a manual trigger, press the F5 key during the recording.
To start only the default recorder, all other recorders must be disabeld in the recorder list.
Note |
A recorder can be enabled only if variables have been defined that should be recorded. |
You can also
Enabling and Disabling a Recorder
See also
Defining an Automatic Start Trigger