Activating and Deactivating Sending of Cyclic Commands

To activate and deactivate the sending of cyclic XCP commands:

1. In the Hardware menu, select Send Cyclic Commands.

2. To activate or deactivate the sending of cyclic commands for one individual device, select a device.

   ü<device>	Sending of cyclic commands for selected device is activated.
   <device>	Sending of cyclic commands for selected device is deactivated.

3. To activate the sending of cyclic commands for all devices, select Resume All.

4. To deactivate the sending of cyclic commands for all devices, select Suppress All.

   Note
   If the sending of cyclic commands is deactivated, the accuracy of the time information of the measurement data may deteriorate.

See also

Hardware Menu