Properties for Combined Editors

This tab contains the following fields:

Window title

Changes the window title.

Show working point automatically

Shows the process point automatically when you select another curve or map.

Note
Features related to process point display do not support multidimensional maps (i.e. maps with three or more inputs).

Autom. optimum size

Adapts the window size automatically to the displayed content.

This tab contains the following fields:

Data Representation

Displays the type of information representation.

Phys	Represents the value of the calibration variable as physical variable (i.e. after applying the conversion formula (COMPU_METHOD)).
Hex	Represents the implementation value of the calibration variable as hexadecimal variable.
Dec	Represents the implementation value of the calibration variable as decimal variable.
Bin	Represents the implementation value of the calibration variable as binary variable.

Representation

Enables the selection of the display type of curves and maps.

X-Axis descent

Changes the order of base points on the X-axis from ascending to descending.

Y-Axis descent

Changes the order of base points on the Y-axis from ascending to descending.

X/Y axis interchange

Swaps the X- and Y-axes.

Z-axis interchange

Swaps the X and Z axes.

Note
You can make this setting only if maps are displayed as a group of curves (2D display) in the Combined Editor.

Display change markers

Displays or hides the marks (red or blue arrows) which indicate the change in a value in the Combined Editor.

Size of graphic in combined editor [%]

Defines the size of the graphical area in the combined editor.

Show process point

Note
Features related to process point display do not support multidimensional maps, that means maps with three or more inputs.

Hides/shows the display of the process point.

Show process point history

Note
Features related to process point display do not support multidimensional maps, that means maps with three or more inputs.

Hides or shows the display of the process points reached during a measurement. The process points run through in the table cells and the corresponding segments in the signal field are underlaid green.

Arrangement 2D

Defines the relative position of the signal field to the table in the Combined Editor when curves and maps are displayed 2-dimensionally.

Arrangement 3D

Note
You can make these settings only if maps are displayed as objects (3D display) in the Combined Editor.

Defines the relative position of the signal field to the table in the Combined Editor when maps are displayed 3-dimensionally.

Display modes

Enables selection of the display mode of data and base point values in the Combined Editor.

Additional properties for multidimensional maps

The following property is only available if the combined editor contains a multidimensional map (i.e. a map with three or more inputs).

Z-Axis descent

Note
You can make this setting only if a multidimensional map is displayed as an object (3D display) in the Combined Editor.

Changes the order of base points on the Z-axis from ascending to descending.

Arrangement 4D

Defines the relative position of the signal field to the table in the Combined Editor when maps are displayed as 4D graphics.

Autom. optimum size

Adapts the window size automatically to the displayed content.

Overlay

This tab contains the following fields:

Overlay Mode

Defines whether curves or maps shall be overlaid in the Combined Editor or whether only one map or curve is displayed at a time.

Representation

Enables the selection of the display type of overlaid curves or maps.

Arrangement 2D

Defines the relative position of the signal field to the table in the Combined Editor when curves or maps are displayed 2-dimensionally.

X/Y axis interchange

Swaps the X- and Y-axes.

X-Axis descent

Changes the order of base points on the X-axis from ascending to descending.

Display change markers

Displays or hides the marks (red or blue arrows) which indicate the change in a value in the Combined Editor.

Zoom x axis

Specifies the percentage for zooming the x axis in or out.

Zoom value axis

Specifies the percentage for zooming the value axis in or out.

Rotation of horizontal axis description

Defines the rotation of the axis description for the X axis.

Rotation of vertical axis description

Note
You can make this setting only if maps are displayed as a group of curves (2D display) in the Combined Editor.

Defines the rotation of the axis description for the additional axis.

Process point histogram

Defines whether the history of the process point is displayed.

Note
Features related to process point display do not support multidimensional maps (i.e. maps with three or more inputs).

Table

This tab contains the following fields:

Value decimals

Defines the number of decimal places in data.

Exponential view of values

Enables the data to be displayed as exponential values.

Column width

Defines the table column width.

Show Grid

Hides/shows the row and column grid in the table.

Auto size columns

Adjusts the table cell width to the contents.

3D Graphic

This tab contains the following fields:

Zoom x axis

Specifies the percentage for zooming the x axis in or out.

Zoom y axis

Specifies the percentage for zooming the y axis in or out.

Zoom value axis

Specifies the percentage for zooming the value axis in or out.

x axis range

Enables input of upper and lower limits for the x axis.

y axis range

Enables input of upper and lower limits for the y axis.

Values range

Defines the range within which the values on the value axis are located.

Surface

Enables the surface view to be selected for curves.

Representation

Defines whether maps are shown 2-dimensionally or 3-dimensionally.

Display walls

Hides/shows the display of the walls in the coordinates system. The walls simplify the display of the 3-dimensional space.

Perspective

Specifies the virtual viewpoint on the 3D graphic.

Grid lines

Enables selection of a line type for the grid.

Display x axis

Hides/shows the display of the x axis pair.

Display y axis

Hides/shows the display of the y axis pair.

Display value axis

Hides/shows the display of the value axis pair.

Display axes titles

Hides/shows the axis titles.

Font size of titles

Specifies the font size of the axis description.

Wall color

Selects a color for the walls.

2D Graphic

This tab contains the following fields:

Zoom x axis

Specifies the percentage for zooming the X-axis in or out.

Zoom y axis

Note
You can make this setting only if maps are displayed as a group of curves (2D display) in the Combined Editor.

Specifies the percentage for zooming the Y-axis in or out.

Zoom value axis

Specifies the percentage for zooming the value axis in or out.

X axis range

Enables input of upper and lower limits for the X-axis.

Y axis range

Note
You can make this setting only if maps are displayed as a group of curves (2D display) in the Combined Editor.

Enables input of upper and lower limits for the Y-axis.

Values range

Enables input of upper and lower limits for the value axis.

Grid lines

Enables selection of a line type for the grid.

Rotation of horizontal axis description

Defines the rotation of the axis description for the X axis.

Rotation of vertical axis description

Note
You can make this setting only if maps are displayed as a group of curves (2D display) in the Combined Editor.

Defines the rotation of the axis description for the Y axis.

Rotation of additional axis description

Note
You can make this setting only if maps are displayed as a group of curves (2D display) in the Combined Editor.

Defines the rotation of the axis description for the additional axis.

Overlay Autoscale X

Note
You can make this setting only if maps are displayed as a group of curves (2D display) in the Combined Editor.

Adapts the x-axis area automatically in the overlay view.

Overlay Autoscale Z

Note
You can make this setting only if maps are displayed as a group of curves (2D display) in the Combined Editor.

Adapts the z-axis area automatically in the overlay view.

Visible curves

Note
You can make this setting only if maps are displayed as a group of curves (2D display) in the Combined Editor.

Defines the number of curves to be displayed in the array of curves.

Axis

This tab contains the following fields:

X distrib. decimals

Defines the number of decimal places of axis points on the x axis.

Exponential view of x axis

Shows axis points on the x axis as exponential values.

Float INC/DEC step for x axis

Defines the float value (decimal number) by which the x axis point values are incremented/decremented.

Y distrib. decimals

Defines the number of decimal places of axis points on the y axis.

Note
You can make this setting only if maps are displayed in the Combined Editor.

Exponential view of y axis

Shows axis points on the y axis as exponential values.

Note
You can make this setting only if maps are displayed in the Combined Editor.

Float INC/DEC step for y axis

Defines the float value (decimal number) by which the y axis point values are incremented/decremented.

Note
You can make this setting only if maps are displayed in the Combined Editor.

Edit

This tab contains the following fields:

Value interpolation type

Enables selection of the interpolation method of data used when changing the axis points.

INC/DEC step in physical representation

Defines the float value (decimal number) by which the calibration values are incremented/decremented.