Mapping Experiment to Workspace Dialog Box

This dialog box contains the following fields and buttons:

ECU Device Mapping:

• Stored ECU device(s)

  Shows devices available in the experiment for ECU access.

• Available ECU device(s)

  Shows devices configured in the current workspace for ECU access.

• Mapped ECU device(s)

  Shows the assignment between devices used and devices configured in the workspace for ECU access.

Raster Mapping:

• Supported raster(s) [stored]

  Shows the rasters stored in the experiment for ECU access.

• Supported raster(s) [available]

  Shows the rasters configured in the current workspace for ECU access.

• Mapped raster(s)

  Shows the assignment between rasters used and rasters configured in the workspace for ECU access.

Measure Device Mapping:(ambiguous signals)

• Stored signal(s)

  Shows the measurement channels available in the experiment.

• Available signal(s)

  Shows the measurement channels available in the hardware which is configured in the current workspace.

• Mapped signal(s)

  Shows the assignment between measurement channels used in the experiment and those available in the hardware of the current workspace.

<< Previous

Returns to the previous assignment step.

>> Next

Goes to the next assignment step.

Assign -->

Makes a manual assignment between selected devices, rasters, or channels.

<-- Deassign

Cancels the selected assignment.

Finish

Ends the assignment of devices, rasters, and channels and closes the dialog box. If not all assignments have been made, INCA makes the remaining assignments automatically.

Cancel

Closes the dialog box and discards your changes.