Defining Arrangement of Table and Signal Field

Note

You can make these settings only if you have activated a Combined Editor.

To define the arrangement of table and signal field in the Combined Editor:

  1. In the context menu, select Properties.

    The dialog box Properties: Combined Editor opens.

  2. Select the name of the variable tab.

  3. Depending on the display dimension of the curves and maps, select the corresponding value in the Arrangement 2D or Arrangement 3D line by clicking in the line:

    • Graphic top / table bottom to display the signal field above the table.
    • Graphic bottom / table top to display the signal field under the table.
    • Graphic left / table right to display the signal field to the left of the table.
    • Graphic right / table left to display the signal field to the right of the table.
  4. Click OK.