Defining settings for x/y/z axis points

Depending on the type of calibration variable you have selected, you are shown the following axes:

• x axis for characteristic curve or map
• y axis for map
• z axis for map with three input parameters
• z axis 1/2 for map with four input parameters

The process of managing axis points is the same for all axes.

To define the settings for an axis point:

1. In the context menu select the submenu x/y/z axis or z axis-1/2 and then the menu function x/y/z axis points Breakpoints Setup ....

   The x/y/z axis Breakpoints Setup dialog box opens.

2. In the Offset field, enter the first axis point value on the axis.
3. In the Distance field, enter the step width of the axis division.

4. Click OK.

   The axis point settings change accordingly.