User Options for Measurements: YT-Oscilloscope (outdated) Tab
To go to this tab, click the User Options
button and select the Experiment
tab. On the Experiment tab, double-click in the
Value field of the Measure
option, then select the YT-Oscilloscope (outdated) tab.
You can make the following settings:
Show axes ranges
Also displays the axis ranges for each signal in the signal list.
Display mode
Defines the type of recording.
Recorder mode
Display is point by point. If the maximum number of points is reached, the oldest points are deleted.
Oscilloscope Mode
Display is point by point. If the maximum number of points is reached, the display window is cleared and the display begins again.
Region of show numeric value
Defines the display of number values.
At column: Name
The values are displayed in the same column as the name.
At own column
The values are displayed in a separate column.
Display type
Defines the way in which the points on a measurement curve are connected in the graphic display.
Lines
The measured values are interconnected by a continuous line.
Steps
The Y-value change from measured value to measured value; the curve is stepped.
Fill style
Defines whether the signal areas are to be highlighted color for digital signals.
none
The digital signal is displayed as a line.
filled
The area between the signal and the x axis is filled with the corresponding signal color.
Highlight selected channels in graphic
Defines whether the selected channel is to be highlighted on the graphic display.
Grid
Defines the grid of the signal view.
dynamic
The grid size depends on the scaling of the signal.
fixed linear
The grid size is fixed.
Off
No grid is shown.
Background color
Opens a color palette. The color you select is used as the background to the oscilloscope.
Show the index
Defines whether the signals in the graphic region of the oscilloscope are to be indexed by default with the signal number from the tabular signal list. Display of the index number can be activated separately for the display in INCA and the print-out.
No
Signals are not indexed in the graphic region of the oscilloscope.
View
The graphic signals are indexed in the graphic region of the oscilloscope in INCA, but not in the print-out.
Print-out
The graphic signals are indexed in the print-out, but not in the graphic region of the oscilloscope in INCA.
View and print-out
The graphic signals are indexed both in the graphic region of the oscilloscope in INCA and in the print-out.
Channel color list
Opens a dialog box in which you can define the sequence of the colors that are used for representing the measurement data.
Show measure channel lists
Defines whether a list of channels is to be displayed.
Show rate
Defines whether the acquisition rate is to be displayed.
Symbol
Defines the default form of the symbol at the acquisition points: you can select between a rectangle, a cross, a circle and a triangle.
Size symbol
Defines the size of the symbol at the acquisition points (between 5 and 100).
Rotation of each axis description
Defines the angle of the axis label.
Show numeric value
Defines whether the numeric value of each signal is displayed in the measure value list.
Current value
Display the current measured value.
None
No numeric display of the measured value.
Minimum peak
Display the smallest measured value.
Maximum peak
Display the largest measured value.
See