User Options for Calibration: Combined Map Editor Tab
To go to this tab, click the User
Options
button and select the Experiment
tab. On the Experiment tab, double-click in the
Value field of the Calibration
option, then select the Combined Map Editor tab.
The settings in this tab are only applied to newly added combined map editors; they have no influence on existing combined map editors.
You can perform the following settings:
Representation
Defines the value representation.
Table
Values are displayed as a table.
2D Graphic
Values are displayed as a curve.
3D Graphic
Values are displayed as a map.
Table & 2D Graphic
Values are displayed as a table and a curve. You can define the arrangement of the table editor and the 2D map editor with the Arrangement 2D option.
Table & 3D Graphic
Values are displayed as a table and a map. You can define the arrangement of the table editor and the 3D map editor with the Arrangement 3D option.
Display change markers
Defines whether the change markers should be displayed.
Show process point
Defines whether the process point should be shown during the measurement.
Show process point history
Defines whether the process points taken in the current measurement should be shown in addition to the current process point.
Arrangement 2D
Defines the arrangement of the table editor and the 2D map editor in the combined editor.
Size of graphic in combined editor [%]
Defines the size of the 2D/3D graphic in % (in reference to the size of the map editor).
Rotation of horizontal axis description
Defines in which angle the x-axis is labeled.
Rotation of vertical axis description
Defines in which angle the Y-axis is labeled.
Display mode
Defines the display mode.
Current page
Shows the adjustment values of the active page.
Both pages
Shows the adjustment values of the working and reference page tiled horizontally.
Differences
Shows the deviations of the adjustment values of the working page based on the reference page.
Current page and differences
Shows the adjustment values of the reference page with the deviations of the working page.
Current page with addresses
Shows the adjustment values of the current page with the addresses of the adjustment values.
Display grid lines in table
Defines, whether a grid should be displayed in the table.
Display grid lines in graphic
Defines, whether a grid should be displayed in the graphic. You can choose between various grid types.
Z value interpolation type
Defines the method to be used for calculating Z values when calibrating or adding axis point values.
none
The Z values are not interpolated.
normal
The Z values are calculated as follows: If the axis point value is reduced, a linear interpolation is made between the earlier values of the changed axis point and the
values of the next-smallest axis point. If the axis point value is increased, the interpolation is made between the earlier values of the axis point and the values of the next-largest axis point.
Int. to larger axis point
The Z values are interpolated linearly between the earlier values of the corresponding axis point and the values of the next-largest axis point. When the largest axis point is edited, the values of the next-smallest axis point are used for the interpolation.
Int. to smaller axis point
The Z values are interpolated linearly between the earlier values of the corresponding axis point and the values of the next-smallest axis point. When the smallest axis point is edited, the values of the next-largest axis point are used as a limit for the interpolation.
Auto size columns
Defines whether the columns are resized automatically.
Rotation of additional axis description
Defines in which angle the Z-axis should be labeled.
Display walls
Defines whether the axis walls should be displayed in the 3D graphic.
Wall color
Opens a color palette. The color you selected is used as the wall color for the 3D graphic.
Arrangement 3D
Defines the arrangement of the table editor and the 3D map editor in the combined editor.
See