Settings for XY-Oscilloscope (outdated)

In the Experiment pane of the Display Configuration tab, properties for the elements used in the Experiment are displayed.

If you click on an XY-Oscilloscope (outdated) in the experiment structure, the corresponding properties are displayed in the following tables:

This table contains the following properties:

Name

Shows the names of the measure variables contained in the XY-Oscilloscope.

Data representation

Displays the type of information representation.

Phys	Represents the value of the measure variable as physical variable.
Hex	Represents the value of the measure variable as hexadecimal variable.
Dec	Represents the value of the measure variable as decimal variable.
Bin	Represents the value of the measure variable as binary variable.

Line style

Defines the type in which the line of a measurement curve should be displayed.

None	Measurement curve is not displayed.
Solid	Measurement curve is displayed by a solid line.
Long dashed	Measurement curve is displayed by a dashed line with long dashes.
Dotted	Measurement curve is displayed by a dotted line.
Short dashed	Measurement curve is displayed by a dashed line with short dashes.
Short long dashed	Measurement curve is displayed by a dashed line with short and long dashes.
Dash dotted	Measurement curve is displayed by a dashed line with dots and short dashes.

Color

Opens a color palette. The set color is used as line color of the measure variable.

Symbol

Defines the default form of the symbol at the acquisition points: you can select between a rectangle, a cross, a circle and a triangle.

Symbol size

Defines the size of the symbol at the acquisition points (between 5 and 100).

Show index

Defines whether the signals in the graphic region of the oscilloscope are to be index by default with the signal number from the tabular signal list.

Note
Display of the index number can be activated separately for the display in INCA and the print-out.

No	Signals are not indexed in the graphic region of the oscilloscope.
View	The graphic signals are indexed in the graphic region of the oscilloscope in INCA, but not in the print-out.
Printout	The graphic signals are indexed in the printout, but not in the graphic region of the oscilloscope in INCA.
View and Printout	The graphic signals are indexed both in the graphic region of the oscilloscope in INCA and in the print-out.

Time master

Defines the time axis of the XY-Oscilloscope.

Axis

Defines the Y-axis of the XY-Oscilloscope.

Axis range

Defines the axis range of the measure variable.

Device

Displays the name of the device to which the measure variable belongs.

Oscilloscope	The display is point by point. If the maximum number of points is reached, the display window is cleared and the display begins again.
Recorder	The display is point by point. If the maximum number of points is reached, the oldest points are deleted.

No grid	No grid is shown.
Dynamic grid	The grid size depends on the scaling of the signal.

Current Value	Display the current measured value.
No	No numeric display of the measured value.
Minimum Peak	Display the smallest measured value.
Maximum Peak	Display the largest measured value.