Settings for Calibration Window
In the Experiment pane of the Display Configuration tab, properties for the elements used in the Experiment are displayed.
If you click on a calibration window in the experiment structure, the corresponding properties are displayed in the following tables:
Widgets tableThis table contains the following properties:
Name
Shows the name of the calibration window.
Signals tableThis table contains the following properties:
Name
Displays the names of the calibration variables contained in the calibration window.
Background color
Opens a color palette. The set color is used as background color of the calibration variable.
Character color
Opens a color palette. The set color is used as font color of the calibration variable.
Display type
Shows the display type of the calibration variable.
Note |
Depending on which display types are used for the calibration variables in the calibration window, the tables Numeric Editor Signals,Slider Editor Signals or Bit Editor Signals can be displayed. |
Device
Displays the name of the device to which the calibration belongs.
Numeric Editor Signals tableThis table contains the following properties:
Name
Displays the names of the calibration variables used in the Numeric Editor.
Data representation
Displays the type of information representation.
Phys | Represents the value of the calibration variable as physical variable. |
Hex | Represents the value of the calibration variable as hexadecimal variable. |
Dec | Represents the value of the calibration variable as decimal variable. |
Bin | Represents the value of the calibration variable as binary variable. |
Precision
Defines the number of decimals scalar values.
Inc/dec step
Defines the value by which the calibration variable should be increased or decreased for incrementing/decrementing.
Show unit
Displays the unit of the calibration variable.
Yes | The units of the calibration variable are displayed in the Numeric Editor. |
No | The units of the calibration variable are not displayed in the Numeric Editor. |
Device
Displays the name of the device to which the calibration variable belongs.
Slider Editor Signals tableThis table contains the following properties:
Name
Displays the name of the calibration variables contained in the Slider Editor.
Data representation
Displays the type of information representation.
Phys | Represents the value of the calibration variable as physical variable. |
Hex | Represents the value of the calibration variable as hexadecimal variable. |
Dec | Represents the value of the calibration variable as decimal variable. |
Bin | Represents the value of the calibration variable as binary variable. |
Precision
Defines the number of decimals scalar values.
Inc/dec step
Defines the value by which the calibration variable should be increased or decreased for incrementing/decrementing.
Show unit
Displays the unit of the calibration variable.
Yes | The units of the calibration variable are displayed in the Slider Editor. |
No | The units of the calibration variable are not displayed in the Slider Editor. |
Range
Allows entering an upper and lower limit for the display range of the Slider Editor.
Device
Displays the name of the device to which the calibration belongs.
Bit Editor Signals tableThis table contains the following properties:
Name
Displays the name of the calibration variables contained in the Bit Editor.
Device
Displays the name of the device to which the calibration belongs.