Errors During the Measurement
Error Message | Error Description | Remedy |
Service for the following diagnostic signals reported execution state: Execution state: '{text}' Description of the error: '{text}' Vendor description of the error: '{text}' | The response of a diagnostic service has not been answered "positively". All signals which could not be measured are listed in the error message. If no signals could be measured, the link to the hardware may not work correctly. | Remove the signals which are not supported by the control device. Check the connection with the hardware and initialize the hardware anew. |
No response received for signal: | In the response of the diagnostic service, no reply is present for the signal. Possibly, the control device does not support all diagnostic signals, which are included in the DSL file. | Remove the signals which are not supported by the control device. Check the connection with the hardware and initialize the hardware anew. |
Parameter for the following diagnostic signal has an error: '{signal}' Description of the error: '{text}' Vendor description of the error: '{text}' | In the response, a parameter for the signal is faulty and could not be evaluated. This means that no physical value could be calculated. This could have been caused by a faulty ODX data input or a faulty response from the control device. | Correct the ODX Project or exchange it. |
Service for the following diagnostic signals has an error: '{list of signals}' Description of the error: '{text}' Vendor description of the error: '{text}' | In the answer, either a response or a parameter of the response is faulty. This could have been caused by a faulty ODX data input or a faulty response from the control equipment. | Correct the ODX Project or exchange it. |
Exception by updating value for signal '{signal name}': '{exception}' | The conversion of a data type of the D-server in a data type, which INCA understands, has failed. This could have been caused by a faulty ODX data input or a faulty answer from the control device. | Correct the ODX Project or exchange it. |
{signal name}writing value:'{exception}' | A value of the signal could not be written into the target server. | Start the measurement anew. |