Definitions in the Variable Selection Dialog Box

The diagnostic signals in the Variable Selection dialog box are divided into the following signal groups in the OBDonCAN_ETAS_SAEJ1979<Version>.pdx project (with the included signal list):

• Mode1_PIDs

  In the signal group "Mode1_PIDs", you find information from service $01 (see OBDonCAN "PID Data" Tab), i.e. up-to-date diagnostic data from the powertrain.

• Mode2_FreezeFrame_PIDs

  In the signal group "Mode2_FreezeFrame_PIDs", you find information from service $02 (see OBDonCAN "Freeze Frames" Tab).

• Mode3_DTCs

  In the signal group "Mode3_DTCs", you find signals that are saved and can be deleted again with service $03 (see OBDonCAN "DTCs" Tab).

• Mode7_DTCs

  In the signal group "Mode7_DTCs", you find trouble codes discovered during the current or last completed driving cycle (see OBDonCAN "DTCs" Tab).

• Mode9_IUMPR

  Mode9_IUMPR_compression

  Mode9_IUMPR_spark

  In the signal group "Mode9_IUMPR", you find signals from In-Use Performance Tracking (see OBDonCAN "In Use Performance Tracking" Tab).

• ModeA_DTCs

  In the signal group "ModeA_DTCs", you find signals that have the status "permanent" and cannot be deleted (see OBDonCAN "DTCs" Tab).