Options: General Tab (ASAM-MCD 3MC V1.0)

To go to this tab, click the Options toolbar button and select the General tab.

You can make the following general settings:

INCA:

Load differences after switching ignition off/on
Defines whether control devices are automatically initialized with data saved in INCA following ignition off/on.
Save modified experiment at start of the ASAM MCD 3MC session
Defines whether changes are saved to the active experiment before the start of the ASAM session.
Close Experiment at end of session
Defines that the experiment will be closed after finishing the ASAM-MCD 3MC session.
The Database Manager will not be closed.
Keep Experiment open at end of session
Defines that the experiment will be left open and ECU access will stay activated after finishing the ASAM-MCD 3MC session.
This allows for continuing manual work in the Experiment Environment without having to load the experiment once again.
Restore Experiment to the state prior to session start
Defines that the state before starting the ASAM-MCD 3MC session will be reestablished.
If available, always use FULI device
Defines whether INCA shall attempt to automatically configure all measurements and calibrations used by the MCD3 client automatically for INCA-MCE usage, thus maximising the reuse of existing testbed automation scripts; only the data path needs to be adapted. Using this mode the FULI Logical Links will not be shown.
The recorder configuration is excluded from this auto-configuration mechanism. This means that if variable A and variable B are configured by a collector and variable C is configured in a recorder, then only variables A and B are configured for INCA-MCE usage.