ETAM9 ECU Adapter (Power)
Usage
The ETAM9 adapts the M-ETK/F-ETK/ X-ETK power signals (Molex 6 pin connector) to the ECU with an 5 pin Molex Pico Spox connector.
The ETAM9 cable requires on the ECU side an Vertical SMT Header connector [87437-0543] or an Right Angle SMT Header connector [87438-0543].
ECU Signals
|
Pin |
Color |
Signal |
Description |
|
1 |
Blue |
VDDPSTBY (Supply) |
Permanent power supply of ECU interface |
|
2 |
Yellow |
VDDSTBY (Supply) |
Permanent power supply of ECU ED RAM |
|
3 |
Brown |
GND |
Power ground |
|
4 |
Green |
Cal_Wakeup |
Switch to UBatt. ECU wake-up signal (for measurement preparation) |
|
5 |
Red |
SGUBATT1 |
Vehicle battery |
|
6 |
- |
- |
No Connect |
Temperature Range
|
Condition |
Temperature Range |
|
Operating temperature |
-40 °C to +110 °C |
Ordering Information
|
Order Name |
Short Name |
Order Number |
|
ETAM9 F/XETK-S ECU Adapter, MOLEX - MOLEX (6fc - 5fc), 0m136 |
ETAM9 |
F 00K 111 043 |