ETAM5 ECU Adapter (Power)
Usage
The ETAM5 adapts the X-ETK power signals (Molex 6 pin connector) to an ECU with a 5 pin Molex Pico Spox connector. The ECU connector is available as Vertical SMT Header [87437-0543] or Right Angle SMT Header [87438-0543]. The red open wire cable is an additional F-ETK UBatt input. This wire can connect to an CBAM435 cable with UBatt input or to a K50 UBatt adapter.
Mechanical Dimensions
Connectors and Positions
|
Molex Housing |
Wire |
5 mm stripped and signed |
Molex Housing |
|
87439-0600 |
PTFE-5Y |
|
87439-0500 |
|
Molex Terminal |
|
|
|
|
87421-0000 |
|
|
|
|
Side A |
|
Side B |
Side C |
|
|
|
|
|
|
1 |
Blue |
|
1 |
|
2 |
Yellow |
|
2 |
|
3 |
Brown |
|
3 |
|
4 |
Green |
|
4 |
|
5 |
Red |
|
5 |
|
6 |
Red |
Open wire |
|
ECU Signals
|
Pin |
Color |
Signal |
Description |
|
1 |
Blue |
VDDPSTBY (Supply) |
Permanent power supply of ECU interface |
|
2 |
Yellow |
VDDSTBY (Supply) |
Permanent power supply of ECU ED RAM |
|
3 |
Brown |
Ground |
Power ground |
|
4 |
Green |
Cal_Wakeup |
Switch to UBatt. ECU wake-up signal (for measurement preparation) |
|
5 |
Red |
SGUBATT1 |
Vehicle battery |
Temperature Range
|
Condition |
Temperature Range |
|
Operating temperature |
-40 °C to +110 °C |
Ordering Information
|
Order Name |
Short Name |
Order Number |
|
ETAM5 M-ETK/F-ETK ECU Adapter, MOLEX - MOLEX (6fc - 5fc+1c), 0m136 |
ETAM5 |
F 00K 110 101 |