ETAM12 ECU Adapter (Power)
Usage
The ETAM12 adapts F-ETK and X-ETK power signals (Molex 6 pin connector) to an ECU with an 6 pin Molex connector.
Mechanical Dimensions
ECU Signals
The ETAM12 adapts the ETK power signals (Molex 6pin connector) to an ECU with an 6 pin Molex Pico Spox connector. The ECU connector is available as Vertical SMT Header [87437-0643] or Right Angle SMT Header [87438-0643].
|
Pin |
Color |
Signal |
Description |
|
1 |
Blue |
VDDPSTBY (Supply) |
Permanent power supply of ECU interface |
|
2 |
Yellow |
VDDSTBY (Supply) |
Permanent power supply of ECU ED RAM |
|
3 |
Brown |
Ground |
Power ground |
|
4 |
Green |
Cal_Wakeup |
Switch to UBatt. ECU wake-up signal (for measurement preparation) |
|
5 |
Red |
SGUBATT2 |
Vehicle battery |
|
6 |
Red |
SGUBATT1 |
Vehicle battery |
Temperature Range
|
Condition |
Temperature Range |
|
Operating temperature |
-40 °C to +110 °C |
Ordering Information
|
Order Name |
Short Name |
Order Number |
|
MOLEX - MOLEX (6fc - 6fc) adapter cable ETAM12 (0,1 m / 0,33 ft) for connecting an F-/X-ETK to the ECU |
ETAM12 |
F 00K 112 457 |