Status indicator
The ES600.2 is equipped with LEDs for displaying the module's operating state, as well as for displaying the function of the Automotive Ethernet interfaces.
|
Note |
|---|
|
When the ES600.2 is switched on, all LEDs light up briefly. |
ON
|
LED code |
Display |
State |
|---|---|---|
|
|
Off |
No power supply |
|
|
Flashing green |
Module in operating mode "Standby", minimum current consumption. Changing to the "Normal" state requires a Wake-Up event |
|
|
Lit green |
Module in operating mode "Normal" |
|
|
Flashing green |
Module is synchronization master, module is not externally synchronized |
|
|
Flashing green |
Module is synchronization slave, module is externally synchronized: at FE-HOST connection |
|
|
Flashing red |
Firmware update is being performed |
|
|
Lit red |
Error |
TX (FE-HOST)
|
LED code |
Display |
State |
|---|---|---|
|
|
Off |
No Ethernet connection |
|
|
Green |
Ethernet connection (upstream) active |
|
|
Flashing green (3 times per second) |
Data transfer with 10 Mbit/s |
|
|
Flashing green (6 times per second) |
Data transfer with 100 Mbit/s |
TX (GE-HOST)
|
LED code |
Display |
State |
|---|---|---|
|
|
Off |
No Ethernet connection |
|
|
Green |
Ethernet connection (upstream) active |
|
|
Flashing green (3 times per second) |
Data transfer with 10 Mbit/s |
|
|
Flashing green (6 times per second) |
Data transfer with 100 Mbit/s |
|
|
Flashing green (12 times per second) |
Data transfer with 1000 Mbit/s |
TX/ER1 - 6 (ETH)
|
LED code |
Display |
State |
|---|---|---|
|
|
Off |
No Ethernet connection |
|
|
Green |
Ethernet connection (downstream) active |
|
|
Flashing green (3 times per second) |
Data transfer with 10 Mbit/s |
|
|
Flashing green (6 times per second) |
Data transfer with 100 Mbit/s |
|
|
Lit red |
Current overload by the connected module |