Assembly

Only install, connect, disconnect and cable ETAS products and components when they are de-energized.

Assembly location

CAUTION
Class A product This product is not intended for use in residential environments and might not provide adequate protection to radio reception in such environments.

CAUTION

Class A product

This product is not intended for use in residential environments and might not provide adequate protection to radio reception in such environments.

NOTICE
Damage to the electronics due to potential equalization The cables' shield may be connected to the housing, the ground or the ground for the product's power supply. If there are different ground potentials in the test setup, equalizing currents can flow between the products via the cables' shield. Take account of different electric potentials in your test setup and take appropriate measures to prevent equalizing currents.

NOTICE

Damage to the electronics due to potential equalization

The cables' shield may be connected to the housing, the ground or the ground for the product's power supply. If there are different ground potentials in the test setup, equalizing currents can flow between the products via the cables' shield.
Take account of different electric potentials in your test setup and take appropriate measures to prevent equalizing currents.

Securing the Product

The housing must not be damaged while securing the product.

WARNING
Risk of injury due to inadequate fastening Secure the product so that it does not move uncontrollably. Only use carrier systems and fastening materials that can accommodate the static and dynamic forces of the product and are suitable for the ambient conditions.

WARNING

Risk of injury due to inadequate fastening

Secure the product so that it does not move uncontrollably.

Only use carrier systems and fastening materials that can accommodate the static and dynamic forces of the product and are suitable for the ambient conditions.

Ventilation

Protect the product against direct solar radiation and other sources of heat.
Ensure that there is sufficient air circulation for efficient heat exchange.