Standards and norms
The ES2504 complies with the following standards and norms:
|
Standards |
Title |
Further information |
|---|---|---|
|
IEC 62368-1:2020 (IEC 62368-1:2018), EN IEC 62368-1:2024 + A11:2024 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements |
cTUV-SÜDus to UL 62368-1 in USA/CA |
|
EN 55032:2015 + A11:2020 |
Electromagnetic compatibility of multimedia equipment - Emission requirements (CISPR 32:2015 + COR1:2016 + A1:2019) |
Class A |
|
EN 55035:2017 + A11:2020 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
|
|
EN 301 489-1 V2.2.3 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 1: Common technical requirements |
|
|
EN 301 489-17 V3.2.4 |
ElectroMagnetic Compatibility (EMC)standard for radio equipment and services; - Part 17: Specific conditions for Broadband Data Transmission Systems |
|
|
|
Wide-band transmission systems - Data transmission equipment operating in the 2,4 GHz band - Harmonized standard for access to radio spectrum |
|
|
ETSI EN 301 893 V2.2.1 |
5 GHz WAS/RLAN - Harmonized standard for access to radio spectrum |
|
|
ETSI 300 440 V2.2.1 |
Short Range Devices (SRD) - Radio equipment to be used in the 1 GHz to 40 GHz frequency range |
|
|
FCC CFR Title 47, Part 15, Subpart B |
Radio Frequency Devices |
|
|
ANSI C63.4 |
Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz |
|
ES2504.3 is configured for UK Ofcom-approved cellular bands by factory default. Any unauthorized modification of the radio frequency configuration shall be undertaken user’s own risk, and the manufacturer shall not be liable for non-compliances caused by user-initiated configuration change.
EMC Class A
Republic of Korea
이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가정용 환경에서 사용하는 경우 전파간섭의 우려가 있습니다.
This equipment is in Class A suitable for professional use and is for use in electromagnetic environments outside of the home.
USA
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Responsible Party – U.S. Contact Information
ETAS Inc.
15800 N. Hagerty Road
Plymouth, MI
48170
www.etas.com/US